sath*ck

nakopíruj soubory app, emergency, rootfs a kernel do root adresáře TFTP serveru na PC a spusť TFTP server
copy files app, emergency, rootfs and kernel to TFTP server root on PC and then run TFTP server

STB7100-Ref>

/IP TFTP SERVERU v PC/
set serverip 192.168.x.x

/IP KATI BOXU/
set ipaddr 192.168.x.x

tftpboot a4000000 kernel
erase a0040000 a01fffff
cp.b a4000000 a0040000 1c0000

tftpboot a4000000 rootfs
erase a02a0000 a04dffff
cp.b a4000000 a02a0000 240000

tftpboot a4000000 app
erase a04e0000 a0adffff
cp.b a4000000 a04e0000 600000

tftpboot a4000000 emergency
erase a0ae0000 a0bfffff
cp.b a4000000 a0ae0000 120000

boot

SF Team

www.satforum.cz/kathrein/kati_repair_rootfs_by_sfteam.rar

__________________
VU DUO PVR HD & DREAMBOX DM7020S v3
Humax IRCI5400 +CAM ToH3.7
Nokia 9600 + DVB2000 v1.82.0v_ NoOneManIt v1.3h

Up / Download pro DREAMBOX

K..

Nice HOW-TO-REVIVE-NON-BOOTING-BOX

The only very small enhancement - use, instead of fixed file size, local automatic variable
named "$filesize".

So, for example, flashing kernel ends up with "cp.b a4000000 a0040000 $filesize"

/K

dusan75

Hello!

Help please, i try to edit my box ip address in config file, reboot and now can not connect to the box. I think reflash is sollution to reset ip settings. Box reflashed but now can not boot up, the message is:

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)


I try the repair methodd but not working.... trying.... trying... T T T

chrz

I think my box is out of order. I try to upgrade via tfpt, upgrade is ok, but on display is "Willkomen" and on console i see something like this:

i2c_adapter i2c-0: master_send: writing 2 bytes.ate_machine: Data Write...Statu
iic_algo_state_machine:
iic_algo_state_machine: Data Write...Status=0x1226 0x2-
iic_algo_state_machine:
iic_algo_state_machine: Stop
iic_algo_state_machine:
iic_algo_state_machine: Complete
i2c_adapter i2c-0: i2c-0 ioctl, cmd: 0x707, arg: 7e32a8.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
iic_algo_stm_xfer:
iic_algo_state_machine:
iic_algo_state_machine: -Start address 0x40
iic_algo_state_machine:
iic_algo_state_machine: Data Write...Status=0x1226 0x0-iic_algo_state_machine:

iic_algo_state_machine: -Rep Start addr 0x40
iic_algo_state_machine:
iic_algo_state_machine:
iic_algo_state_machine: Prepare to Read... Status=0x1a26
iic_algo_state_machine:
iic_algo_state_machine: Data Read...Status=0x1e27 2-
iic_algo_state_machine: Stop
iic_algo_state_machine:
iic_algo_state_machine: Complete
i2c_adapter i2c-0ş


Even simple memory test won't finished sucessfully:

Board: STb7100-mboard

U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 27 2007 - 13:37:28)

DRAM: 32 MB
write time out = 1, clock = 40
write time out = 1, clock = 40
Flash: 16 MB
In: serial
Out: serial
Err: serial
pll0 freq 531
pll1 freq 400
Net: VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
Button_value = 7
Hit any key to stop autoboot: 0
STB7100-REF> mtest

Mem error @ 0x00778DE0: found A57F692E, expected 000003CC

Mem error @ 0x00778DE4: found E18CD9A1, expected 000003CD

Mem error @ 0x00778DE8: found 8DF8DD0F, expected 000003CE

Mem error @ 0x00778DEC: found 2E43C758, expected 000003CF

Mem error @ 0x00778DF0: found A1561B44, expected 000003D0

Mem error @ 0x00778DF4: found 64BC1FF4, expected 000003D1

Mem error @ 0x00778DF8: found F55383D6, expected 000003D2

Mem error @ 0x00778DFC: found 4FFE8103, expected 000003D3

Mem error @ 0x00778E00: found 790DDB12, expected 000003D4

Mem error @ 0x00778E04: found F3716B4D, expected 000003D5

Mem error @ 0x00778E08: found 0DB7ADC7, expected 000003D6

Can anybody confirm that I should replace the box ? If it's possible :/ because my first upgrade to SF Image was ok and box was working well for one day. Now I'm bit worrying about warranty.

Ok, problem is solved. concelate method form this topic Kernel Panic..... is the best

carilto

Please, need help.
I tried it several times, and after 'Load Address: 0xa4000000`i always see T T T T T and
then the message 'Retry count exceeded; starting again'.
WXP is fresh installed, firewall is inaktiv and antivir is disabled. Both cables are connected, network is working,
terminal is CRT 5.5.
I know , there are several helps in this forum, but i soon
will be crazy.
What can I do else?
Thanks