Stránka 2 z 4 PrvníPrvní 1234 PosledníPoslední
Zobrazují se odpovědi 16 až 30 z 46

Téma: Triple Dragon img

  1. #16
    Registrovaný uživatel
    Založen
    17.01.2005
    Příspěvky
    15
    Post Thanks / Like
    Downloads
    0
    Uploads
    0

    Sound not synchron after recording.

    This was a very good job done again.
    Just wondering if anyone else has the same problem when recording to hd.
    When playing back the sound not synchron with the movie.
    Anyone else having this problem?

    Cheers
    Pls keep up the good work JirkaS.

    MakkieDaD

  2. #17
    Registrovaný uživatel
    Založen
    28.05.2003
    Příspěvky
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    INFO:
    On ukforum is a new tdimage_2005_01_25

    I have tested ,fund better ci funktion Freecam 020 as offizell 16-2,other Symbols on PVR and movierecording have now Titelname.

    I still waiting for SF-fullimage

    cu dschlawiner

  3. #18
    Registrovaný uživatel
    Založen
    26.03.2002
    Příspěvky
    704
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    http://robik.nextra.at/sat

    mtd2 - this is only rootfs
    full - full img over tdtools

  4. #19
    Registrovaný uživatel
    Založen
    28.05.2003
    Příspěvky
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    @Jirka

    Danke ,endlich geht newcamd und ci zur gleichen Zeit

    Respect!

  5. #20
    Registrovaný uživatel
    Založen
    26.03.2002
    Příspěvky
    704
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Citace Původně odeslal dschlawiner
    @Jirka

    Danke ,endlich geht newcamd und ci zur gleichen Zeit

    Respect!
    emu switch:

    for help

    emu

    emu new ------ switch betad ( in config uper slot), cardserver ( down slot)
    newcamd
    (in up slot works Xdream acces card(XplusTV) mayby PW ????

    emu evor ------ evocamd v 50 with rdgd als server - /var/ect/radegast.conf

    emu evoc ------ evocamd v 50 with cardserver/var/keys/newcamd-client.txtx

    emu mg --- mgcamd v 120 with cardserver


    keyupdate.sh - for update SoftCam.Key

    dragconv.sh - help for convert keys

    conax.sh - convert conax keys from SoftCam.Key


    updimg.sh - for next update mtd2

    incl -setting for Astra 19E and Hotbird 13E,
    -static IP 192.168.1.253 netmask 255.255.255.0


    Jirka
    Naposledy upravil JirkaS : 27.01.2005 v 02:33

  6. #21
    Registrovaný uživatel
    Založen
    28.05.2003
    Příspěvky
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    @Jirka

    Ich habe auch schon radegast & evocamd oder radegast & mgcamd zusammen zum laufen gebracht beim Chameleon-v004.

    Ich habe es jetzt auch mit SF-image probiert ging aber nicht,ich denke das die Reader nur auf Conax laufen oder garkeine funktion haben,da meine Conaxtestkarten auch nicht mehr erkannt werden.
    Naposledy upravil dschlawiner : 27.01.2005 v 15:40

  7. #22
    Registrovaný uživatel
    Založen
    27.01.2005
    Příspěvky
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Hallo,
    PW und SCT Karten gehen auch nicht ... werden zwar als Irdetokarten erkannt, aber nur in Slot 2 und der Reset geht dann nicht.

    Ansonsten respekt an Jirka !!

    cu TheDuke

  8. #23
    Registrovaný uživatel
    Založen
    28.05.2003
    Příspěvky
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    @TheDuke
    Geht doch die PWkarte mit EVOCAMR im oberen slot ..
    Ich habes auch erst verkehrt gemacht und nur das 8mb fullgeflasht,das mtd2
    soll mach als 2. image in tmp mit /stb/bin/update-cramfs.sh über telnet updaten.
    Dann hab ich keyupdate gemacht und ./emu evor über telnet angeschaltet
    die PWkarte ist auf gegangen wo ich im CA meune nachscahuen wollte ob die drinn steht,steht nix aber die läuft trotzdem.

    GREETZ
    Naposledy upravil dschlawiner : 28.01.2005 v 02:32

  9. #24
    Registrovaný uživatel
    Založen
    27.01.2005
    Příspěvky
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Citace Původně odeslal dschlawiner
    @TheDuke
    wo ich im CA meune nachscahuen wollte ob die drinn steht,steht nix aber die läuft trotzdem.

    GREETZ
    was sagt denn die konsole wenn du die karte reinschiebst ?
    bei mir bleibt der reset ohne erfolg ....

  10. #25
    Registrovaný uživatel
    Založen
    28.05.2003
    Příspěvky
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Was die Konsole schreibt kann ich dir nicht sagen ich benutze winxp und bin zu Faul immer Hyperterminal noch anzuschmeißen oder kann ich das auch über telnet sehn?

    Wenn du willst das auch andere Karten gehn mußt du schon die netroute in radegast.cfg freigeben da sind noch # davor.

    Aah eben gerade rausgefunden das Newcamd standart gestartet wird dem eintrag in /etc/emu ,wenn ich über telnet "emu evor" eigebe ändert sich der eintrag in tmp/emu aber in etc/emu bleibts auf newcamd stehn.
    Dann läuft meine PWkarte im oberen Slot,wenn ich die aber ziehe und neu einsteck dauerts etwas bis die wieder angeht.

    Oh im Momment hab ich gerade Probleme mit dem Bluezeta Fullx wenn das POPup kommt cimodule gefunden friert mir die Box ein,nach dem Stecker ziehn
    läuft es dann wieder,nach einem zap geht auch gleich wieder die PWkarte.

    Mit evoc oder newcamd bring ich da die Karte nicht auf servererror:
    Connection to 127.0.0.1 failed with error -1, TCP/IP Port:10001


    Egal noch kleine Macken aber bisjetzt das beste Image wo es gibt.
    Naposledy upravil dschlawiner : 28.01.2005 v 16:36

  11. #26
    Registrovaný uživatel
    Založen
    27.01.2005
    Příspěvky
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Hallo,

    hier mal der Log via Konsole mit der SCT Karte:
    [mg][cardserver 01:04:58] Card 1/0 reset
    [cardserver 01:05:00] Card 1/0 init Irdeto card, please wait
    [cardserver 01:05:04] Card 1/0 reset
    [cardserver 01:05:07] Card 1/0 init Irdeto card, please wait
    [cardserver 01:05:11] Card 1/0 reset
    [cardserver 01:05:14] Card 1/0 init Irdeto card, please wait
    [cardserver 01:05:18] Card 1/0 init failed
    Und hier die Startbefehle für die Emu´s

    emu ci - killall emus - only CI modul
    emu evor - start evocamd and radegast server
    emu evoc - start evocamd and cardserver
    emu new - start newcamd and cardserver
    emu mg - start mgcamd and cardserver

  12. #27
    Registrovaný uživatel Avatar uživatele adas
    Založen
    28.04.2004
    Příspěvky
    42
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Jirko kolik zustava mista na Flash-ce??????
    Np. Jak tam bude jen Radegast a NewCamd+klice.
    Je to lepsi nez v Dreambox 7000??? nebo stejne.

    Diky Adas

  13. #28
    Registrovaný uživatel
    Založen
    26.03.2002
    Příspěvky
    704
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Citace Původně odeslal adas
    Jirko kolik zustava mista na Flash-ce??????
    Np. Jak tam bude jen Radegast a NewCamd+klice.
    Je to lepsi nez v Dreambox 7000??? nebo stejne.

    Diky Adas
    Tady je flash je cca 600 kB ale da se nadefinovat vetsi za to pro img - bez kernelu mas 6MB ted se vsemi emu je ten img dlouhy 5.3 MB

    Jirka

  14. #29
    Registrovaný uživatel Avatar uživatele adas
    Založen
    28.04.2004
    Příspěvky
    42
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Jirko
    jak to bude vypadat dal, vsecko na usb......pokud ho dragon ma.
    Co je s USB na nim....ma on vystup , jako 7000???
    Za nedlouho vyjde DM 7020 co uz bude mit 32mb Flash.
    Jak vubec beha ten Tripll, myslim softverovo.

    Diky Adas

  15. #30
    Registrovaný uživatel
    Založen
    28.05.2003
    Příspěvky
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    @The Duke
    Das kommt bei mir bei newcamd als log in der Konsole oberer slot unterer keine reaktion.
    [betad] Card reset
    [betad] reset failed
    [betad] Card removed
    [betad] Card reset
    [betad] init Irdeto card, please wait
    [betad] Card reset
    [betad] init Irdeto card, please wait
    [betad] Card reset
    [betad] init Irdeto card, please wait
    [betad] init failed


    Satscan is auch nicht ok,ich benutzte multfeed Atsra-Hobird-Sirius-Thor, beim neu scannen fehlen zb. RTLWORLD wo nicht mehr gefunden wird.

    Als Fix copy a default-tp.dat to var/share/dvb2001/ dann wird wieder alles gefunden.
    Přiložené soubory Přiložené soubory
    Naposledy upravil dschlawiner : 29.01.2005 v 19:22

Informace o tématu

Users Browsing this Thread

Toto téma si právě prohlíží 1 uživatelů. (0 registrovaných a 1 anonymních)

Podobná témata

  1. Nový Predator 2.16 pro Dragon CAM
    Založil Jackal v sekci fóra CI & CAM moduly
    Odpověďmi: 0
    Poslední příspěvek: 25.06.2004, 23:22
  2. Nový Predator 2.15 pro Dragon CAM
    Založil Jackal v sekci fóra CI & CAM moduly
    Odpověďmi: 0
    Poslední příspěvek: 16.06.2004, 14:56
  3. Nový Predator 2.14 pro Dragon CAM
    Založil Jackal v sekci fóra CI & CAM moduly
    Odpověďmi: 1
    Poslední příspěvek: 09.06.2004, 14:05
  4. Nový Predator 2.12 pro Dragon CAM
    Založil Jackal v sekci fóra CI & CAM moduly
    Odpověďmi: 0
    Poslední příspěvek: 25.05.2004, 23:15
  5. Nový Predator 2.11 pro Dragon CAM
    Založil Jackal v sekci fóra CI & CAM moduly
    Odpověďmi: 0
    Poslední příspěvek: 25.05.2004, 15:59

Štítky pro toto téma

Záložky

Záložky

Pravidla přispívání

  • Nemůžete zakládat nová témata
  • Nemůžete zasílat odpovědi
  • Nemůžete přikládat přílohy
  • You may not edit your posts
  •