Mam na zkousku TD box DVS3300.
Neni to nejhorsi, zatim sw nema takovou uroven jako na DB ale chce to cas
img je na http://robik.nextra.at/sat
Instalace:
1. kopirovat do /tmp
2. konsole
/stb/bin/update-cramfs.sh
3. please reboot reboot
Jirka
Mam na zkousku TD box DVS3300.
Neni to nejhorsi, zatim sw nema takovou uroven jako na DB ale chce to cas
img je na http://robik.nextra.at/sat
Instalace:
1. kopirovat do /tmp
2. konsole
/stb/bin/update-cramfs.sh
3. please reboot reboot
Jirka
Hello Jirkas
You mean TD DBS 3000?
And if is possible some instructions in english.
Thank you
Torpedo
Naposledy upravil JirkaS : 17.01.2005 v 13:36
OKPůvodně odeslal torpedo
1. copy img tdfsystem.bin in /tmp ( over ftp)
2. telnet consol:
/stb/bin/update-cramfs.sh
3. now going message
-delete xx%
-copy
- please reboot
4. after message please reboot:
reboot
5. now is in mtd2 new files without var
6. menu TD - factory reset.
Change emu:
default is evocamd v39
1. telnet consol
echo "NEWCAMD" > /tmp/emu
emusel
Img inclusive:
- IP 192.168.1.253
-mask 255.255.255.0
-gw 192.168.1.1
Astra1 19E+hb 13e
EVOCAMD.V 19
newcamd V.5.25
keys
possible cs over evocamd
This is only beta vers img
Next week will simple switch for emu.
Jirka
Cheers Jirkas,
This can be flashed over any image?
Or should there be an official image on it?
On which image this should be flashed?
Makes me very happy to see more and more people are working on the triple now.
Specially to see you in there with youre very big reputation concerning images.
Cheers and keep up this good job m8.
Makkiedad
Sorry Jirkas,
After reading youre info again noticed it should be done with the mtd2 one.
Didnt see that before.
Anyone allready know if any cvs is available somewhere so more people can work on images?
Cheers
HiPůvodně odeslal makkiedad
CVs is not available sorry.
Img can work easy -as for dreambox. Via squashfs 2.0
for me works like this :after the reboot i make var erase from the bootloader menu and after restart.
Anyway is great image with good potentials.
Very nice try m8
Cheeers
Torpedo
Fully agree with torpedo :
5. now is in mtd2 new files without var
6. menu TD - factory reset.
Dont do the factory reset but from the bootloader menu (power on with two buttons pressed on triple) scroll down and choose the var delete option.
Working fine, specially like the scripts.(Thx adraktas for the tip)
Well done Jirkas.
Laterrrrrrrrrrrrrr
Napis mi to cesky,zajima mne to tema
Diky Adas
Other method:Původně odeslal makkiedad
before update-cramfs.sh all file and dir in /var delete. Without file in var ( /var/etc/networks) geht after update-cramfs and reboot - automatic restote var.tar.gz )
Jirka
http://robik.nextra.at/sat
mtd2 - this is only rootfs
full - full img over tdtools
@Jirka
Danke ,endlich geht newcamd und ci zur gleichen Zeit
Respect!
emu switch:Původně odeslal dschlawiner
for help
emu
emu new ------ switch betad ( in config uper slot), cardserver ( down slot)
newcamd
(in up slot works Xdream acces card(XplusTV) mayby PW ????
emu evor ------ evocamd v 50 with rdgd als server - /var/ect/radegast.conf
emu evoc ------ evocamd v 50 with cardserver/var/keys/newcamd-client.txtx
emu mg --- mgcamd v 120 with cardserver
keyupdate.sh - for update SoftCam.Key
dragconv.sh - help for convert keys
conax.sh - convert conax keys from SoftCam.Key
updimg.sh - for next update mtd2
incl -setting for Astra 19E and Hotbird 13E,
-static IP 192.168.1.253 netmask 255.255.255.0
Jirka
Naposledy upravil JirkaS : 27.01.2005 v 01:33
@Jirka
Ich habe auch schon radegast & evocamd oder radegast & mgcamd zusammen zum laufen gebracht beim Chameleon-v004.
Ich habe es jetzt auch mit SF-image probiert ging aber nicht,ich denke das die Reader nur auf Conax laufen oder garkeine funktion haben,da meine Conaxtestkarten auch nicht mehr erkannt werden.
Naposledy upravil dschlawiner : 27.01.2005 v 14:40
Hallo,
PW und SCT Karten gehen auch nicht ... werden zwar als Irdetokarten erkannt, aber nur in Slot 2 und der Reset geht dann nicht.
Ansonsten respekt an Jirka !!
cu TheDuke
Toto téma si právě prohlíží 1 uživatelů. (0 registrovaných a 1 anonymních)
Záložky