ok, dhcp works now.
I´ve flashed a 3rd time...and now it works
Hello,
sorry for asking, but can I use the usb stick for updating on the new image.
At the moment I am using the first SF Team Image.
What does that mean flashing 3x times?
Greetings Malcom
Naposledy upravil Malcom : 07.07.2007 v 11:37
[QUOTE
this is how it worked for me:
- erase the box via hyperterminal[/QUOTE]
Hi,
Thanks pinhead !!!
Can somebody explain, how to erase the box via hyperterminal ?
Regards.
Nachmany
Run Hyperterminal, connect to UFS with serial Cable. (Speed: 115200 and Flow-Control: Off)
Turn power on UFS off / on and quick press CTRL+Z on PC
now type:
erase A0200000 A029ffff
erase A02A0000 A04Dffff
erase A04E0000 A0Adffff
erase A0C00000 A0ffffff
strg + c is not needed just press any key u like in the first 1-2 seconds when starting ufs.
Then u arrivin uboot where u can erase the blocks as shown in post above.
Attention don't mistype the lines.
Greetings X23
I typed on Hyperterminal:
erase A0200000 A029ffff
erase A02A0000 A04Dffff
erase A04E0000 A0Adffff
erase A0C00000 A0ffffff
and I did 1X times flashing the new image via usb stick and everything is fine now.
You are wrong. May be you missed initial work from Kofola group.
They are real ones who made Katy hack possible and make radegast-like
client to show "how to do".
More likely SFteam even don't have access to such info.
You can see that they did very nice job moving original
(hackish) image to something more usable, but they still
use kofola's client to get emu working.
But don't worry, I think other emus come very soon as
if you look on kofola binary, it is done very simple, so
anybody can learn how to use demuxes from it very easy
Kathrein UFS910 HDTV CAMD3 EDITION
THX Doz21
Cau Adas
how can i install the camd3889f?
taquilla run?
thanks
maestro
Naposledy upravil maestro : 07.07.2007 v 21:55
I notice, that after using the new SF image (6.7.2007) the remote control unit is not working like before (much more slowly, as origin FW 1.02). can somebody this confirm?
@Jirka, did you any change with remote control drivers?
hello,
can you tell me, how can i install an Emu ? (mgcamd, gbox ...)
(sorry for my English )
hello
you can install the radegast emu ;-)
Naposledy upravil waslos : 08.07.2007 v 12:14
Toto téma si právě prohlíží 1 uživatelů. (0 registrovaných a 1 anonymních)
Záložky