Stránka 1 z 3 123 PosledníPoslední
Zobrazují se odpovědi 1 až 15 z 32

Téma: camd3 -> newcs on dm7020

  1. #1
    Registrovaný uživatel
    Založen
    09.07.2007
    Příspěvky
    11
    Post Thanks / Like
    Downloads
    0
    Uploads
    0

    camd3 -> newcs on dm7020

    Hi

    Before I buy an 910, I wanted to test camd3 - I normally use evocamd or mgcamd with newcs.

    I have a DM7020 with 2 original subscription cards (conax and nds), it is running newcs and evocamd and works fine.

    I also have a DM500 with camd3, and I get a connection to my newcs server and the 2 cards - 0b00 and 09f0.

    When I change channels, I get output in the console, but picture, it is quite strange.

    Here is my camd3 config:

    (DM7020 = 192.168.1.10)
    SLOT=192.168.1.10:4:1:1:1:10001:userass:0102030405060708091011121314
    SLOT=192.168.1.10:4:1:1:1:10002:userass:0102030405060708091011121314

    Any feedback would e appreciated.

  2. #2
    Registrovaný uživatel Avatar uživatele PiratDK
    Založen
    06.07.2007
    Bydliště
    Next to my neighbour
    Příspěvky
    32
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Maybe you should ask in Dreambox section.
    This is about kathrein boxes

  3. #3
    Registrovaný uživatel
    Založen
    09.07.2007
    Příspěvky
    11
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Yes I know, but this is "basic" camd3 related, and I would think that I would have the same isse from a 910 to my 7020 newcs.

    I would like to know if there is an issue with my config before I buy a 910 that's all.

    Thanks

  4. #4
    Registrovaný uživatel Avatar uživatele PiratDK
    Založen
    06.07.2007
    Bydliště
    Next to my neighbour
    Příspěvky
    32
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Dont buy kathrein if you want it to connect to newcs as a client.
    It simply dont work

  5. #5
    Registrovaný uživatel
    Založen
    09.07.2007
    Příspěvky
    11
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Thanks then my post was of value anyway

    Does it only work with radegast or what is the problem?

  6. #6
    Registrovaný uživatel Avatar uživatele PiratDK
    Založen
    06.07.2007
    Bydliště
    Next to my neighbour
    Příspěvky
    32
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    It decodes only channels by use of radegast, and only channels which are hacked.
    When eg. Premiere closes for pirate TV, I bet this kathrein will be sold for 10 % of it's price.

  7. #7
    Registrovaný uživatel
    Založen
    09.07.2007
    Příspěvky
    11
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Ok so even if I connect to my newcs and using the radegast protocol, it will not work with my original cards?

    - so we have to wait until evocamd or similar is compiled to the 910?

  8. #8
    Registrovaný uživatel Avatar uživatele PiratDK
    Založen
    06.07.2007
    Bydliště
    Next to my neighbour
    Příspěvky
    32
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    If you can make radegast connect to newcs, you will just end up with lots of socket hung up's and no picture.
    Dont expect evocamd nor mgcamd for this box.
    Romours says that it wont be made.
    Even newcs wont support radegast protocol in newer versions, afaik.

  9. #9
    Registrovaný uživatel
    Založen
    07.08.2005
    Příspěvky
    53
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    use only (see msg from jirka) newcamd protocol, working fine!

  10. #10
    Registrovaný uživatel Avatar uživatele PiratDK
    Založen
    06.07.2007
    Bydliště
    Next to my neighbour
    Příspěvky
    32
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    It logs into newcs, but it dosent decode channels

  11. #11
    Registrovaný uživatel
    Založen
    07.08.2005
    Příspěvky
    53
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    hmm I'm try it and working with last version of newcs!


    in cfg is example
    net share 1 = hack.somwhere.net:12345:newcamd:user1:Pass2:01 02 03 04 05 06 07 08 09 10 11 12 13 14

    this not work

    but this

    net share 1 = hack.somwhere.net:12345:2:user1:Pass2:01 02 03 04 05 06 07 08 09 10 11 12 13 14


    works !!!!!!!!

  12. #12
    Registrovaný uživatel Avatar uživatele Raitsa2
    Založen
    02.07.2007
    Bydliště
    Finland
    Příspěvky
    37
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Crusader, could you or anyone else post your working radegast.cfg in here, please?
    This would help a lot us who are fighting to get things running with 910.

    You can remove your IP/server detals with xxx

  13. #13
    Registrovaný uživatel Avatar uživatele PiratDK
    Založen
    06.07.2007
    Bydliště
    Next to my neighbour
    Příspěvky
    32
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Above should work if you add a user with these info into newcs.xml :

    Kód:
    <user>user1</user>
    <password>Pass2</password>
    But as you also have seen, it simply dont work.
    Unless radegast.cfg includes more settings that we havent set correctly.

  14. #14
    Registrovaný uživatel Avatar uživatele PiratDK
    Založen
    06.07.2007
    Bydliště
    Next to my neighbour
    Příspěvky
    32
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    As you can see from newcs, kathrein box is logged in, but has no Ok ECM's :

    Kód:
    | ID | Username        | Logon Status    | Ok ECM   | Bad ECM  | EMM      | Hostname                  | Client     | Spider | AU  | SO  |
    | 05 |        kathrein | 00d 00h 01m 21s |        0 |        0 |        0 |              192.168.1.44 |    Generic |    No  |  On | Off |

  15. #15
    Registrovaný uživatel
    Založen
    07.08.2005
    Příspěvky
    53
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    here is, if not work, try delete all from directory keys

Informace o tématu

Users Browsing this Thread

Toto téma si právě prohlíží 1 uživatelů. (0 registrovaných a 1 anonymních)

Podobná témata

  1. camd3889f is out!
    Založil lucas v sekci fóra Kathrein UFS910 - Firmware/Software/Hardware
    Odpověďmi: 46
    Poslední příspěvek: 02.10.2007, 05:57
  2. How can i change over between rdgd and camd3 ?
    Založil Nachmany v sekci fóra English Kati Forum
    Odpověďmi: 5
    Poslední příspěvek: 19.07.2007, 18:33
  3. DM7020 vs Technomate 9100 Linux
    Založil vlasto88 v sekci fóra DreamBox - Firmware/Software/Hardware
    Odpověďmi: 0
    Poslední příspěvek: 13.07.2007, 13:11
  4. Slovak link na DM7020
    Založil MMx v sekci fóra DreamBox - Firmware/Software/Hardware
    Odpověďmi: 2
    Poslední příspěvek: 22.05.2006, 21:25

Štítky pro toto téma

Záložky

Záložky

Pravidla přispívání

  • Nemůžete zakládat nová témata
  • Nemůžete zasílat odpovědi
  • Nemůžete přikládat přílohy
  • You may not edit your posts
  •