Zobrazují se odpovědi 1 až 14 z 14

Téma: 7020+500+500 ???

  1. #1
    Registrovaný uživatel
    Založen
    25.03.2007
    Příspěvky
    9
    Post Thanks / Like
    Downloads
    6
    Uploads
    0

    7020+500+500 ???

    Dm7020+500+500 ???

    --------------------------------------------------------------------------------

    Mam doma 7020 tam mam 2 karty a mam este 2 DM500 a chcem zdielat karty co mam 7020 v DM 500 mam v DM7020 image SFteam pouzivam emu Mgcam 1.24 a cardserver 6.09 .Karty v DM7020 mi idu ale neviem nastavit newcamd.con pre vnutornu siet na DM500
    DM7020 ma nastevenie / server /
    10.0.0.105
    255.255.255.0
    lan
    10.0.0.254
    10.0.0.254
    DM 500
    10.0.0.111
    DM 500
    10.0.0.115

    takto mam nastavenu siet v primacou siet slape bez problemou.
    tak to mam nastaveny

    newcamd.conf 7020

    EMU = yes
    PREFER_EMU = yes
    AU = yes
    OSD_TIMEOUT = 0
    OSD_WEB_LOGIN = root:dreambox
    SHOW_ALL_CA_SYSTEMS = no
    DEBUG_ECM = yes
    DEBUG_EMM = no
    DEBUG_CAM = yes
    SHOW_PAT = no
    SHOW_PMT = no
    SHOW_ECM = no
    SHOW_CAT = no
    SHOW_EMM = no
    SHOW_CWS_ECM = no
    SHOW_CWS_EMM = no
    EMM_REPORT_WRONG_SIG = no
    DEFAULT_CW_DELAY = 0
    RELOAD_CONFIG_ON_ZAP = yes
    RELOAD_KEYLIST_ON_ZAP = yes
    CA_INFO_FILE = /tmp/cainfo.txt

    CWS_KEEPALIVE = yes
    CWS_CONNECT_TIMEOUT = 20
    CWS_INCOMING_PORT = 12000
    CWS_DEBUG_PORT = 12001
    ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    DEBUG_CWS = yes
    CWS = uds 0 local local
    CWS = uds 1 local local
    CWS = uds 2 local local
    CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
    CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
    CWS = 127.0.0.1 10002 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
    CWS = 127.0.0.1 11003 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan radegas

    takto cardserver 7020

    DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    SERVER_NAME = cardserv
    DEBUG_PORT = 14000
    ADMIN_PORT = 14001
    ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    USER = local local lan dreambox 12000
    #
    # upper card slot
    #
    SERIAL_PORT = 0
    TCP_PORT = 10001
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no
    #
    # lower card slot
    #
    SERIAL_PORT = 1
    TCP_PORT = 10000
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no
    #
    # serial port for phohenix
    #
    SERIAL_PORT = 2
    TCP_PORT = 10002
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no

    takto newcamd.conf v DM500

    EMU = yes
    PREFER_EMU = yes
    AU = yes
    OSD_TIMEOUT = 0
    OSD_WEB_LOGIN = root:dreambox
    SHOW_ALL_CA_SYSTEMS = no
    DEBUG_ECM = yes
    DEBUG_EMM = no
    DEBUG_CWS = yes
    DEBUG_CAM = yes
    SHOW_PAT = no
    SHOW_PMT = no
    SHOW_ECM = no
    SHOW_CAT = no
    SHOW_EMM = no
    SHOW_CWS_ECM = no
    SHOW_CWS_EMM = no
    EMM_REPORT_WRONG_SIG = no
    DEFAULT_CW_DELAY = 0
    RELOAD_CONFIG_ON_ZAP = yes
    RELOAD_KEYLIST_ON_ZAP = no
    CA_INFO_FILE = /tmp/cainfo.txt
    CWS = uds 0 local local
    CWS = uds 1 local local
    CWS = uds 2 local local
    CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 127.0.0.1 10002 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 127.0.0.1 11003 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan radegast
    CWS = 10.0.0.105 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 10.0.0.105 10001 User1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS_KEEPALIVE = yes
    CWS_CONNECT_TIMEOUT = 20
    CWS_INCOMING_PORT = 12000
    CWS_DEBUG_PORT = 12001
    ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    neviem kde je chyba ???

  2. #2
    Registrovaný uživatel
    Založen
    18.01.2005
    Příspěvky
    24
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Citace Původně odeslal acer Zobrazit příspěvek
    Dm7020+500+500 ???

    --------------------------------------------------------------------------------

    Mam doma 7020 tam mam 2 karty a mam este 2 DM500 a chcem zdielat karty co mam 7020 v DM 500 mam v DM7020 image SFteam pouzivam emu Mgcam 1.24 a cardserver 6.09 .Karty v DM7020 mi idu ale neviem nastavit newcamd.con pre vnutornu siet na DM500
    DM7020 ma nastevenie / server /
    10.0.0.105
    255.255.255.0
    lan
    10.0.0.254
    10.0.0.254
    DM 500
    10.0.0.111
    DM 500
    10.0.0.115

    takto mam nastavenu siet v primacou siet slape bez problemou.
    tak to mam nastaveny

    newcamd.conf 7020

    EMU = yes
    PREFER_EMU = yes
    AU = yes
    OSD_TIMEOUT = 0
    OSD_WEB_LOGIN = root:dreambox
    SHOW_ALL_CA_SYSTEMS = no
    DEBUG_ECM = yes
    DEBUG_EMM = no
    DEBUG_CAM = yes
    SHOW_PAT = no
    SHOW_PMT = no
    SHOW_ECM = no
    SHOW_CAT = no
    SHOW_EMM = no
    SHOW_CWS_ECM = no
    SHOW_CWS_EMM = no
    EMM_REPORT_WRONG_SIG = no
    DEFAULT_CW_DELAY = 0
    RELOAD_CONFIG_ON_ZAP = yes
    RELOAD_KEYLIST_ON_ZAP = yes
    CA_INFO_FILE = /tmp/cainfo.txt

    CWS_KEEPALIVE = yes
    CWS_CONNECT_TIMEOUT = 20
    CWS_INCOMING_PORT = 12000
    CWS_DEBUG_PORT = 12001
    ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    DEBUG_CWS = yes
    CWS = uds 0 local local
    CWS = uds 1 local local
    CWS = uds 2 local local
    CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
    CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
    CWS = 127.0.0.1 10002 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
    CWS = 127.0.0.1 11003 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan radegas

    takto cardserver 7020

    DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    SERVER_NAME = cardserv
    DEBUG_PORT = 14000
    ADMIN_PORT = 14001
    ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    USER = local local lan dreambox 12000
    #
    # upper card slot
    #
    SERIAL_PORT = 0
    TCP_PORT = 10001
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no
    #
    # lower card slot
    #
    SERIAL_PORT = 1
    TCP_PORT = 10000
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no
    #
    # serial port for phohenix
    #
    SERIAL_PORT = 2
    TCP_PORT = 10002
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no

    takto newcamd.conf v DM500

    EMU = yes
    PREFER_EMU = yes
    AU = yes
    OSD_TIMEOUT = 0
    OSD_WEB_LOGIN = root:dreambox
    SHOW_ALL_CA_SYSTEMS = no
    DEBUG_ECM = yes
    DEBUG_EMM = no
    DEBUG_CWS = yes
    DEBUG_CAM = yes
    SHOW_PAT = no
    SHOW_PMT = no
    SHOW_ECM = no
    SHOW_CAT = no
    SHOW_EMM = no
    SHOW_CWS_ECM = no
    SHOW_CWS_EMM = no
    EMM_REPORT_WRONG_SIG = no
    DEFAULT_CW_DELAY = 0
    RELOAD_CONFIG_ON_ZAP = yes
    RELOAD_KEYLIST_ON_ZAP = no
    CA_INFO_FILE = /tmp/cainfo.txt
    CWS = uds 0 local local
    CWS = uds 1 local local
    CWS = uds 2 local local
    CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 127.0.0.1 10002 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 127.0.0.1 11003 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan radegast
    CWS = 10.0.0.105 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 10.0.0.105 10001 User1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS_KEEPALIVE = yes
    CWS_CONNECT_TIMEOUT = 20
    CWS_INCOMING_PORT = 12000
    CWS_DEBUG_PORT = 12001
    ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    neviem kde je chyba ???
    Pozri si cardserv.cfg, alebo ako sa to vola, ci tam mas user1

  3. #3
    Registrovaný uživatel
    Založen
    25.03.2007
    Příspěvky
    9
    Post Thanks / Like
    Downloads
    6
    Uploads
    0
    DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    SERVER_NAME = cardserv
    DEBUG_PORT = 14000
    ADMIN_PORT = 14001
    ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    USER = local local lan 127.0.0.1 12000
    USER = user1 user1 lan dreambox 12000
    USER = user2 user2 lan dreambox 12000
    #
    # upper card slot
    #
    SERIAL_PORT = 0
    TCP_PORT = 10001
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no
    #
    # lower card slot
    #
    SERIAL_PORT = 1
    TCP_PORT = 10000
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no
    #
    # serial port for phohenix
    #
    SERIAL_PORT = 2
    TCP_PORT = 10002
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no

  4. #4
    Registrovaný uživatel
    Založen
    18.01.2005
    Příspěvky
    24
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Citace Původně odeslal acer Zobrazit příspěvek
    DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    SERVER_NAME = cardserv
    DEBUG_PORT = 14000
    ADMIN_PORT = 14001
    ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    USER = local local lan 127.0.0.1 12000
    USER = user1 user1 lan dreambox 12000
    USER = user2 user2 lan dreambox 12000
    #
    # upper card slot
    #
    SERIAL_PORT = 0
    TCP_PORT = 10001
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no
    #
    # lower card slot
    #
    SERIAL_PORT = 1
    TCP_PORT = 10000
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no
    #
    # serial port for phohenix
    #
    SERIAL_PORT = 2
    TCP_PORT = 10002
    EMM-G = no
    EMM-S = no
    EMM-U = no
    SPECIAL_FEATURES = no
    Prečo user1 a user2 má reverz login dreambox? Veď tam daj IP dreamu. Alebo to zmaž a vyskúšaj to bez toho:

    USER = user1 user1 lan

  5. #5
    Registrovaný uživatel
    Založen
    25.03.2007
    Příspěvky
    9
    Post Thanks / Like
    Downloads
    6
    Uploads
    0
    skusim
    a mam teda podla teba dobry ten newcamd.conf do DM500
    dobry ???
    dakujem

  6. #6
    Registrovaný uživatel
    Založen
    18.01.2005
    Příspěvky
    24
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Citace Původně odeslal acer Zobrazit příspěvek
    skusim
    a mam teda podla teba dobry ten newcamd.conf do DM500
    dobry ???
    dakujem

    Ak používaš iba 2 karty v DM 7020, tak načo Ti je toľko CWS?
    Tie červené riadky zmaž.

    takto newcamd.conf v DM500

    EMU = yes
    PREFER_EMU = yes
    AU = yes
    OSD_TIMEOUT = 0
    OSD_WEB_LOGIN = root:dreambox
    SHOW_ALL_CA_SYSTEMS = no
    DEBUG_ECM = yes
    DEBUG_EMM = no
    DEBUG_CWS = yes
    DEBUG_CAM = yes
    SHOW_PAT = no
    SHOW_PMT = no
    SHOW_ECM = no
    SHOW_CAT = no
    SHOW_EMM = no
    SHOW_CWS_ECM = no
    SHOW_CWS_EMM = no
    EMM_REPORT_WRONG_SIG = no
    DEFAULT_CW_DELAY = 0
    RELOAD_CONFIG_ON_ZAP = yes
    RELOAD_KEYLIST_ON_ZAP = no
    CA_INFO_FILE = /tmp/cainfo.txt
    CWS = uds 0 local local
    CWS = uds 1 local local
    CWS = uds 2 local local
    CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 127.0.0.1 10002 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 127.0.0.1 11003 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan radegast

    CWS = 10.0.0.105 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 10.0.0.105 10001 User1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS_KEEPALIVE = yes
    CWS_CONNECT_TIMEOUT = 20
    CWS_INCOMING_PORT = 12000
    CWS_DEBUG_PORT = 12001
    ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00

  7. #7
    Registrovaný uživatel
    Založen
    25.03.2007
    Příspěvky
    9
    Post Thanks / Like
    Downloads
    6
    Uploads
    0
    prosim ta nemas nahodou ICQ alebo skype
    dakujem

  8. #8
    Registrovaný uživatel
    Založen
    25.03.2007
    Příspěvky
    9
    Post Thanks / Like
    Downloads
    6
    Uploads
    0
    EMU = yes
    PREFER_EMU = yes
    AU = yes
    OSD_TIMEOUT = 0
    OSD_WEB_LOGIN = root:dreambox
    SHOW_ALL_CA_SYSTEMS = no
    DEBUG_ECM = yes
    DEBUG_EMM = no
    DEBUG_CWS = yes
    DEBUG_CAM = yes
    SHOW_PAT = no
    SHOW_PMT = no
    SHOW_ECM = no
    SHOW_CAT = no
    SHOW_EMM = no
    SHOW_CWS_ECM = no
    SHOW_CWS_EMM = no
    EMM_REPORT_WRONG_SIG = no
    DEFAULT_CW_DELAY = 0
    RELOAD_CONFIG_ON_ZAP = yes
    RELOAD_KEYLIST_ON_ZAP = no
    CA_INFO_FILE = /tmp/cainfo.txt
    CWS = 10.0.0.105 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 10.0.0.105 10001 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS_KEEPALIVE = yes
    CWS_CONNECT_TIMEOUT = 20
    CWS_INCOMING_PORT = 12000
    CWS_DEBUG_PORT = 12001
    ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00

  9. #9
    Registrovaný uživatel
    Založen
    18.01.2005
    Příspěvky
    24
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Citace Původně odeslal acer Zobrazit příspěvek
    EMU = yes
    PREFER_EMU = yes
    AU = yes
    OSD_TIMEOUT = 0
    OSD_WEB_LOGIN = root:dreambox
    SHOW_ALL_CA_SYSTEMS = no
    DEBUG_ECM = yes
    DEBUG_EMM = no
    DEBUG_CWS = yes
    DEBUG_CAM = yes
    SHOW_PAT = no
    SHOW_PMT = no
    SHOW_ECM = no
    SHOW_CAT = no
    SHOW_EMM = no
    SHOW_CWS_ECM = no
    SHOW_CWS_EMM = no
    EMM_REPORT_WRONG_SIG = no
    DEFAULT_CW_DELAY = 0
    RELOAD_CONFIG_ON_ZAP = yes
    RELOAD_KEYLIST_ON_ZAP = no
    CA_INFO_FILE = /tmp/cainfo.txt
    CWS = 10.0.0.105 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 10.0.0.105 10001 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS_KEEPALIVE = yes
    CWS_CONNECT_TIMEOUT = 20
    CWS_INCOMING_PORT = 12000
    CWS_DEBUG_PORT = 12001
    ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    Teraz ešte skontroluj cez telnet či Ti beží mgcamd, či máš mg_cfg a či je správne nakonfigurovaný a či newcamd.conf máš v správnom adresári.

  10. #10
    Registrovaný uživatel
    Založen
    25.03.2007
    Příspěvky
    9
    Post Thanks / Like
    Downloads
    6
    Uploads
    0
    ako mam skontrolovat mgcam cez telnet ??
    mg_cfg som snim nic nerobil

    # EMM messages
    # 00 don't show any EMM's (default)
    # 01 show only valid EMM's
    # 02 show valid and bad EMM's with complete data display
    M: { 01 }

    # ECM messages
    # 00 don't show any ECM's
    # 01 show only valid ECM's (default)
    # 02 show valid and bad ECM's with complete data display
    C: { 01 }

    # AU
    # 00 is ignored (default)
    # 01 enable AU
    # 02 AU Auto
    A: { 02 }

    # key update
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    U: { 01 }

    # key files folder
    # 00 keyfiles in /var/keys
    # 01 keyfiles in /var/tmp
    T: { 00 }

    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    G: { 01 }

    # network retry, use summ for several options
    # 00 disable (default)
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    N: { 04 }

    # network ecm timeout in seconds
    K: { 10 }

    # newcamd dead routes connect retry, sec
    Q: { 600 }

    # network shares priority
    # 00 newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd
    # 02 newcamd, camd3, radegast
    P: { 00 }

    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    O: { 00 }

    # on screen display Options
    # 03 default
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    S: { 03 }

    # Log options
    # 00 Off (default)
    # 01 Network
    # 02 console
    # 03 both
    L: { 00 } 172.16.1.1 28007

    # cache ecm pids and data used to open channels,
    # store pids in /tmp/ca_cache.list at exit, load at startup,
    # same syntax as restore.list
    # 00 Off (default)
    # 01 Ecm pids cache
    # 02 Ecm data cache
    # 03 both caches
    H: { 00 }

    # reread files on zap:
    # 00 No (default)
    # 01 config (including priority and ignore, but not replace/cache)
    # 02 config and keys
    # 03 both
    R: { 00 }

    # debug
    # 00 off (default)
    # 01 on
    D: { 00 }

  11. #11
    Registrovaný uživatel
    Založen
    18.01.2005
    Příspěvky
    24
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Citace Původně odeslal acer Zobrazit příspěvek
    ako mam skontrolovat mgcam cez telnet ??
    mg_cfg som snim nic nerobil

    # EMM messages
    # 00 don't show any EMM's (default)
    # 01 show only valid EMM's
    # 02 show valid and bad EMM's with complete data display
    M: { 01 }

    # ECM messages
    # 00 don't show any ECM's
    # 01 show only valid ECM's (default)
    # 02 show valid and bad ECM's with complete data display
    C: { 01 }

    # AU
    # 00 is ignored (default)
    # 01 enable AU
    # 02 AU Auto
    A: { 02 }

    # key update
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    U: { 01 }

    # key files folder
    # 00 keyfiles in /var/keys
    # 01 keyfiles in /var/tmp
    T: { 00 }

    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    G: { 01 }

    # network retry, use summ for several options
    # 00 disable (default)
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    N: { 04 }

    # network ecm timeout in seconds
    K: { 10 }

    # newcamd dead routes connect retry, sec
    Q: { 600 }

    # network shares priority
    # 00 newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd
    # 02 newcamd, camd3, radegast
    P: { 00 }

    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    O: { 00 }

    # on screen display Options
    # 03 default
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    S: { 03 }

    # Log options
    # 00 Off (default)
    # 01 Network
    # 02 console
    # 03 both
    L: { 00 } 172.16.1.1 28007

    # cache ecm pids and data used to open channels,
    # store pids in /tmp/ca_cache.list at exit, load at startup,
    # same syntax as restore.list
    # 00 Off (default)
    # 01 Ecm pids cache
    # 02 Ecm data cache
    # 03 both caches
    H: { 00 }

    # reread files on zap:
    # 00 No (default)
    # 01 config (including priority and ignore, but not replace/cache)
    # 02 config and keys
    # 03 both
    R: { 00 }

    # debug
    # 00 off (default)
    # 01 on
    D: { 00 }
    Nejde Ti nič na DM500 odkódovať? Ani cez EMU?
    Ak Ti nejde nič, je možné, že nemáš ani binárny súbor mgcamd, alebo má nesprávne atribúty, alebo nemáš dobrý spúšťací script.
    Ak Ti EMU ide a nejde len share, tak nemáš správny newcamd.conf alebo nie je v správnom adresári. Samozrejme za predpokladu, že server beží a je v ňom aj príslušný user.

  12. #12
    Registrovaný uživatel
    Založen
    25.03.2007
    Příspěvky
    9
    Post Thanks / Like
    Downloads
    6
    Uploads
    0
    Na DM500 ide svetko odkodovat cez EMU co ide /premier.Dig+,atd ... /
    mam newcamd.conf adresari var/tuxbox/cong tam ho mam tento upraveny co si mi ti poradil ./user1 user1 /
    A na servery DM7020 ide tiez vsetko ako ma ide aj emu ajm karty ide nacitat
    a tam mam v cardservery dvoch userou user1 a user2

    prosim ta nemas ICQ alebo skype

    dakujem

  13. #13
    Registrovaný uživatel
    Založen
    18.01.2005
    Příspěvky
    24
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    icq326985741

  14. #14
    Registrovaný uživatel
    Založen
    13.06.2004
    Bydliště
    jizničechy _ strakonicko
    Příspěvky
    40
    Post Thanks / Like
    Downloads
    2
    Uploads
    0
    Citace Původně odeslal Zoli Zobrazit příspěvek
    icq326985741

    p. Zoli klaním se .

Informace o tématu

Users Browsing this Thread

Toto téma si právě prohlíží 1 uživatelů. (0 registrovaných a 1 anonymních)

Podobná témata

  1. AAF Basis Image 7020
    Založil 7020 v sekci fóra DreamBox - Firmware/Software/Hardware
    Odpověďmi: 2
    Poslední příspěvek: 07.07.2007, 20:58
  2. Rozdíl mezi DM 500 a DM 7020
    Založil RoPo v sekci fóra DreamBox - Firmware/Software/Hardware
    Odpověďmi: 3
    Poslední příspěvek: 11.03.2006, 18:41
  3. DB 7020 + newcamd 6.04
    Založil Marabu v sekci fóra DreamBox - Firmware/Software/Hardware
    Odpověďmi: 3
    Poslední příspěvek: 21.11.2005, 20:13
  4. emu for 7020?
    Založil danxo v sekci fóra DreamBox - Firmware/Software/Hardware
    Odpověďmi: 3
    Poslední příspěvek: 26.04.2005, 10:47
  5. all_in_one ipk for sf 7020
    Založil hazem2 v sekci fóra DreamBox - Firmware/Software/Hardware
    Odpověďmi: 1
    Poslední příspěvek: 07.04.2005, 02:58

Štítky pro toto téma

Záložky

Záložky

Pravidla přispívání

  • Nemůžete zakládat nová témata
  • Nemůžete zasílat odpovědi
  • Nemůžete přikládat přílohy
  • You may not edit your posts
  •