Zobrazují se odpovědi 1 až 4 z 4

Téma: please help box dead?

Hybrid View

  1. #1
    Registrovaný uživatel
    Založen
    10.08.2007
    Příspěvky
    14
    Post Thanks / Like
    Downloads
    0
    Uploads
    0

    please help box dead?

    can somebody help me i erased the box but i mistyped a line

    erase A04E0000 A0Adffff

    i typed erase A04E0000 A0ADffff with a big D
    now my box wont flash with usb

    can somebody help me please what must i do

    greetz reeldragon

  2. #2
    Registrovaný uživatel Avatar uživatele superpfpf
    Založen
    16.07.2007
    Příspěvky
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0

    Lightbulb

    1.) install a tftp-server (windows e.g. http://perso.orange.fr/philippe.jounin/tftpd32.html)
    2.) download the "emergency-kernel" and copy "emergency.ub" to your tftp-share --> http://www.megaupload.com/de/?d=66RV985P
    3.) connect the receiver through serial and network port and start the terminalapplication on the serial port
    4.) power on the receiver and press immediately <enter> on the terminal, you should see the uboot prompt (STB7100-Ref>)
    5.) on uboot prompt set the box ip with "set ipaddr 192.168.x.x" (you have to adapt x.x to your settings, both have to be in the same subnet)
    6.) on uboot prompt set the tftp-server ip with "set serverip 192.168.x.x" (you have to adapt x.x to your settings, both have to be in the same subnet)
    7.) on uboot prompt copy the kernel with "tftp a4000000 emergency.ub" into memory
    8.) plugin the prepared usb-stick (you can get a full update of all partitions here --> http://www.megaupload.com/de/?d=63MJTFN9)
    9.) on uboot prompt start the kernel from memory with "bootm a4000000"

    now the emergency-system should boot and starting to update...

  3. #3
    Registrovaný uživatel
    Založen
    10.08.2007
    Příspěvky
    14
    Post Thanks / Like
    Downloads
    0
    Uploads
    0

    thanks

    Thank you fore quick reply ik am gonna do what you say i let you know if it worked.
    The box is alive again thank you
    thanks

    greetzzz reeldragon
    Naposledy upravil reeldragon34 : 13.08.2007 v 01:14

  4. #4
    Registrovaný uživatel
    Založen
    02.06.2008
    Příspěvky
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Citace Původně odeslal superpfpf Zobrazit příspěvek
    3.) connect the receiver through serial and network port and start the terminalapplication on the serial port
    4.) power on the receiver and press immediately <enter> on the terminal, you should see the uboot prompt (STB7100-Ref>)
    .
    Please explain to this noobie (me) how to start the terminal application (where is it in xp and how to get it prepared to do the work;
    thanks, I am going crazy with my kathi.

Informace o tématu

Users Browsing this Thread

Toto téma si právě prohlíží 1 uživatelů. (0 registrovaných a 1 anonymních)

Podobná témata

  1. Chyba při bootu IP BOX 200
    Založil blafikenot v sekci fóra AB IPBOX - RELOOK - Firmware/Software/Hardware
    Odpověďmi: 9
    Poslední příspěvek: 06.12.2009, 17:44
  2. Ip Box + Ip Box / prosba /
    Založil acer v sekci fóra AB IPBOX - RELOOK - Firmware/Software/Hardware
    Odpověďmi: 1
    Poslední příspěvek: 08.11.2007, 13:17
  3. Ip box 250 a skylink
    Založil mysiak001 v sekci fóra AB IPBOX - RELOOK - Firmware/Software/Hardware
    Odpověďmi: 6
    Poslední příspěvek: 01.06.2007, 20:01
  4. pomoc s mgcamd na IP BOX 200
    Založil bossko v sekci fóra AB IPBOX - RELOOK - Firmware/Software/Hardware
    Odpověďmi: 13
    Poslední příspěvek: 19.01.2007, 01:03

Štítky pro toto téma

Záložky

Záložky

Pravidla přispívání

  • Nemůžete zakládat nová témata
  • Nemůžete zasílat odpovědi
  • Nemůžete přikládat přílohy
  • You may not edit your posts
  •